The conveyor sides are manufactured from low friction polyethylene and the belts can be supplied in a range of plastic materials. There is also a choice of colours. Belt flights can be added in a range of types and sizes to suit your requirements.

The modular linked belt runs in a groove precisely machined in the elevator side frames. This keeps the belt under control and prevents side movement. Belt widths, horizontal lengths and inclined lengths are infinitely variable.

Standard Elevator

  • Modular linked belt
  • Solid plastic machined side frames
  • Various lengths available
  • Range of belt widths
  • Belts in Acetyl, polypropylene and polyethylene
  • Flights 25mm, 50 and 76mm high
  • Monex anodised aluminium frame
  • Jacking feet or locking casters

Download PDF Catalogue

Swan Neck Elevator

  • Range of belt materials and colours
  • Easy Change Belts
  • Plastic or stainless steel pins

Motor Drive

  • 230v Single phase or 415 three phase Variable Speed
  • Integral controller
  • Overload protection
  • Choice of makes

Straight Section

  • Various lengths & widths available
  • Variable speed
  • Integral controller


  • Hoppers designed to suit your components
  • Manufactures in stainless steel
  • Can be lined to protect components

Special Chutes

  • Special discharge chutes are available
  • Manufactured in stainless steel

Steel Elevator M2303

  • Modular linked belt
  • Belt width 200
  • Discharge heights 0.7 to 6M
  • Support frame 40mm square with tee slots
  • Drive rollers 50mm diameter
  • Powder coated finish or all stainless steel
  • Motor 230v 50W or 415/3/50 50W
  • Thermal overload protection & Continuous rating
  • B class insulation & terminal box IP54
  • Belt speeds from 0.6 to 15 M/min
  • FDA approved belts available
  • Flight heights from 6mm to 50mm
  • Flight spacing from 12mm

Bulk Storage Hopper M2403

  • Large bulk storage capacity, up to one cubic meter
  • Used with our M2300 elevators
  • Gentle on components
  • Uses our highly successful M1950 conveyor
  • Standard belt width 200mm – others available
  • Low noise operation
  • Rollers 50mm diameter
  • Powder coated finish or stainless steel
  • Motor 230v or 415v, 3 phase, 50hz
  • B class insulation & terminal box to Ip54
  • Belt speeds 0.5 to 7M/min
  • Variable speed
  • Range of special textured or flighted belts
  • FDA approved belt option

Stainless Steel Elevator M2304

  • Modular plastic FDA approved link belt
  • Many flight types available
  • Flight heights from 6mm to 100mm
  • Flight spacing from 50mm
  • Belt width 300mm
  • Discharge heights 2 to 6M
  • Drive rollers 100mm diameter
  • Modular design based on M19100 conveyors
  • Stainless steel hopper & elevator
  • Choice of stainless steel or anodised extrusion frame
  • Motor 230v or 415/3/50
  • Thermal overload protection
  • B class insulation & terminal box IP54
  • Belt speeds from 0.6 to 15 M/min

© Monk Conveyors 2020Company Registered Number: 4014039