Chain. The chain is designed to flex in both plains. It is moulded in an acetal copolymer which has a high tensile strength and a high resistance to wear and chemicals.
Straight section. Extruded aluminium beam section with HMW polyethylene chain supports and guides. Tee slots to accommodate guide rail brackets, joining plates etc.
Drive Module. Choice of SEW or Motovario drive packages. Belt speeds range from 3 to 50m/min. Variable speed inverters are available installed in IP65 enclosures.
Idler Module. Compact design for fitting into restricted spaces.
Wheel Bend. Radius diameters of 140, 160 and 200mm with angles of 30, 45,90 and 180 degrees. Shown with high friction chain.
Vertical Bend. Radius of 300, 400 and 1000mm with angles of 5, 7,15,25,45 and 90 degrees. Shown with pinch-grip chain.
Gripper Chain. Chain has soft silicone rubber attachments that pinch grip components. Shown handling 5L plastic containers.
Stands. Suitable for floor fixing, vertical adjustment is incorporated.
STAINLESS STEEL Flex-Chain click here
The series MM Flex-Chain is used in many types of industry. The acetal co-polymer chain runs in high density polyethylene slide rails inside an anodised aluminium alloy extruded conveyor beam. It is capable of making sharp radius bends in either the horizontal or vertical plains with very low friction and low noise. Bends with a radius as low as 150mm are available with bend angles of 30°, 45°, 90° and 180°. The system is ideal for manufacturers and assemblers where floor space is a major constraint as the system is three dimensional i.e. the area above interconnected machines and processes can be extensively utilised, ensuring that access to machines is not restricted. Bends and incline modules are pre-assembled ensuring that a Flex-Chain conveying system can be installed easily within a very short time-frame by using just simple hand tools.
.